In light of the recent Coronavirus outbreak there has been a focus on proper hand hygiene. Hand hygiene is vital for food safety, but before handling ready-to-eat foods (RTE), disposable glove selection and use should also be assessed. Read or download our Hand/Glove Hygiene & Food Safety Glove Use Guide below.
Excellent hand hygiene has been identified by the MPI as one of the key preventative actions in minimising the "risk of spreading pathogens". When handling food, it is also essential to wear the correct glove and follow rigorous food safety procedures.
Make sure you are using a quality nitrile glove, sourced from a reputable supplier with manufacturing and quality standards in place.
Be aware, numerous scientific studies have shown vinyl gloves to contain micro-tears and holes, not visible to the naked eye, which allow bacteria or virus to pass through both to the food you are handling, and from the food to you. The average vinyl failure rate reported was more than one out of every two gloves!
Ask your supervisor for more information so you are protected sufficiently.
Gloves should be discarded immediately and changed:
Gloves should not be stored outside of the dispenser box (e.g. in pockets). Any gloves that spill onto surfaces or the floor must be discarded immediately.
Following MPI recommendations, wash hands immediately with soap and water for at least 20 seconds, and dry completely:
Read our Eagle Protect Complete Guide to Hand Hygiene for effective hand washing and sanitising techniques. Antiseptic hand sanitisers can be used in conjunction with disposable gloves but are generally thought of as less effective and may degrade your disposable glove material.
The FDA Food Code stipulates “food employees may not contact exposed, ready-to-eat (RTE) food with their bare hands and shall use suitable utensils such as single-use gloves”. However, the code also highlights that “gloves may serve as a source of cross-contamination if misused”. Wearing disposable gloves alone does not prevent the spread of bacteria and viruses that can contaminate food - glove type, quality and processes must be assessed too.
For a glove to effectively prevent the transmission of pathogens cleanliness, durability and barrier quality must be considered. Higher quality raw materials and production processes increase the glove’s strength, flexibility and durability, and consideration of this degree of barrier protection is essential when procuring gloves for the food industry.
Data indicates around 34% of all food-borne outbreaks identify bare-hand cross-contamination as a contributory cause, with 16% implicating gloves in the cross-contamination. Using the correct type of quality, clean disposable gloves, and following correct processes, gave by far, the safest and best outcome in avoiding cross-contamination and food-borne illness outbreaks.
Contact our experts to answer all your questions about improving your hand hygiene and food safety procedures through the correct use of hygiene products, disposable gloves and person protective equipment (PPE) clothing.